procurement adverts

Chevron Nigeria Limited

R.C. 6135

Operator of the NNPC/Chevron Joint Venture

Tender Advert for Provision of HVAC Maintenance Services

Nipex Tender No: 0300348 

Introduction:

Chevron Nigeria Limited (CNL), operator of the Nigerian National Petroleum Corporation (NNPC)/CNL Joint Venture, plans to engage the services of competent and qualified companies with relevant experience in the area of provision of HVAC maintenance and operation services to support CNL’s oil and gas production activities at its Escravos, Offshore, Terminal, Onshore and Swamp locations, and other CNL locations including its operational support and logistics bases in Lagos, Warri and Port Harcourt as required.

The services are estimated to commence first quarter of 2016 for a proposed contract term of two (2) years plus an optional one (1) year term extension.

Scope of Work:

The scope of work shall include, but will not be limited to the following:

Provision of all services, including supply of all skilled, qualified and certified personnel, supervision and provision of testing devices, equipment, tools, and other items necessary for the maintenance (predictive, preventive and corrective) and operation of HVAC system(s). The services will also include engineering, project management, equipment specification, procurement, commissioning, and operation for major and minor turnarounds. Services shall be performed 24 hours a day, 7 days per week on a call-out basis to support CNL’s oil and gas production activities. 

The services will specifically cover all aspects of repair and maintenance of HVAC systems including:

  • Routine preventive, corrective and predictive maintenance of all HVAC systems as directed by CNL or based on the Original Equipment Manufacturer (OEM) recommendations. The HVAC systems include window units, split units, central unit packages and various types HVAC chiller packages with simple and complex control systems used in process plants and Infrastructures including interfaces with Process Control Systems and Alarming systems.
  • Troubleshooting and repair of HVAC systems and ancillary components including the electrical, instrumentation, controls and mechanical components of the HVAC system and
  • Provision of HVAC duct and piping insulation and re-insulation (various types and sizes) and HVAC ducting, re-ducting and piping (various types and sizes). This includes removal of the existing insulation and ducting in the case of re-insulation and re-ducting.
  • Engagements with the OEM to develop equipment and parts specifications and job procedures, and to repair, commission and startup the equipment.
  • Operational procedure and specification development in accordance with industry recommended standards e.g. ASHRAE and OEM
  • Provision of tools and equipment including specialist tools and diagnostic equipment. This includes transportation of the tools and equipment to CNL’s locations.
  • All manpower, management, supervision and resources necessary to perform the services listed above.
  • Consumables, if required, which shall include but not be limited to:

(a)       Air Filters of required sizes

(b)       Refrigerant gas of required specification

(c)       Oil of specified type recommended by manufacturer

(d)       Operational spare parts (other than those indicated by CNL)

  • Routine operational and, major and minor

Mandatory Tender Requirements:

(A)      To be eligible for this tender exercise, Interested bidders are required to be pre – qualified in Category 30103 (Process / Utilities / Piping / HVAC Services) Category A, B, C and D in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified bidders in this category by the bid close date will receive an Invitation to Technical Tender (ITT).

(B)       Please note that interested bidders including their proposed sub-contractor(s) shall be required to:

(I)        Meet all JQS mandatory requirements to be listed as “PREQUALIFIED” and “LIVE” for a category in the JQS database.

(II)       Meet all Nigerian Content requirements stated in this advert in their responses to the ITT. Failure to meet the Nigerian Content requirements is a “FATAL FLAW”.

(C)       To determine if you are pre-qualified and view the product/service category you are listed for: Openwww.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.

(D)      If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.

(E)       To initiate and complete the JQS pre-qualification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.

Nigerian Content Requirements

CNL is committed to the development of the Nigerian Oil and Gas Industry in accordance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.

Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).

Interested bidders shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in the next tender stage.

The following are the Nigerian Content requirements interested bidders are expected to comply with in their technical bid submission.

(A)      Demonstrate that the entity is a Nigerian registered company, or a Nigerian registered company in genuine alliance or joint venture with a foreign company, with the details of the scope of the alliance or joint venture and responsibilities of the parties for services covered by this tender opportunity provided. Such companies must show evidence of a binding joint venture agreement duly signed by the CEO of both companies including evidence or plans for physical operational presence and set-up in Nigeria.

(B)       Furnish details of company ownership and shareholding structure. Also submit clear photocopies of your CAC Forms C02 and Co7.

(C)       Provide evidence of the percentage of 1) key management positions that are held by Nigerians and 2) total work force that are Nigerians. Also, show overall percentage of work to be performed by Nigerian resources relative to total work volume.

(D)      Provide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of bidder’s Nigerian Content contact or manager.

(E)       State proposed total scope of work to be performed by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshops. Attach details of past experience of use of such offices and workshops.

(F)       Specific to this tender opportunity, provide a detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.

(G)      Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).

(H)     Location of in-country facilities, (equipment, storage, workshops, repair, maintenance and testing facilities).

(I)        Interested bidders must be willing and able to provide evidence of maximization of made-in-Nigeria goods and services.

(J)       Provide details on any other Nigerian Content initiative your company is involved in.

(K)      Provide evidence of Memorandum of Understanding (MOU) with the Oil & Gas Trainers Association of Nigeria (OGTAN) registered trainer to conduct classroom training modules and on the job attachment.

(L)      Provide human capacity building development plan including budget which must be a minimum of 10% man-hours or cost. Training will be targeted at developing capacity of personnel other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers will be utilized to cover classroom modules.

(M)     Provide details of equipment ownership.

(N)      Interested bidders are required to present Nigerian Content Equipment Certificates (NCEC) issued by NCDMB (or evidence of application for the certificate) in respect of any components, spares, equipment, systems and packages to be used for the proposed services being tendered.

(O)      All interested bidders are required to submit as part of the Nigerian Content requirement, a signed Memorandum of Agreement (MOA) between it and one of the research and development (R & D) clusters established by NCDMB. The MOA shall be relevant to the scope of services and shall indicate how the bidder intends to use the relevant R&D clusters during the performance of the services.

Close Date

Only bidders who are registered with NJQS Product/Category 30103 (Process / Utilities / Piping / HVAC Services) Category A, B, C and D by 4:00pm, August 7, 2015 being the advert close date shall be invited to submit a technical bid.

Please note the following:

(1)       Companies that are eligible for this tender opportunity are expected to be prequalified in NJQS under the stated product/service category.

(2)       The ITT and any further progression of this tender shall be via NipeX.

(3)       All costs incurred by the interested bidder in preparing and processing NJQS prequalification shall be solely for the interested bidders accounts.

(4)       This advertisement shall neither be construed as any form of commitment on the part of CNL to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from CNL, NNPC and/or any of their affiliates by virtue of such companies’ having been prequalified in NJQS.

(5)       The tendering process shall be the NNPC tendering process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified bidders will be requested to submit commercial tenders.

(6)       CNL will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.

Please visit NipeX portal at www.nipexng.com for this advert and other information.

Management

Chevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B, 12825, Lagos.

Chevron Nigeria Limited

R.C. 6135

Operator of the NNPC/Chevron Joint Venture

Tender Advert for Provision of HVAC Maintenance Services

Nipex Tender No: 0300348 

Introduction:

Chevron Nigeria Limited (CNL), operator of the Nigerian National Petroleum Corporation (NNPC)/CNL Joint Venture, plans to engage the services of competent and qualified companies with relevant experience in the area of provision of HVAC maintenance and operation services to support CNL’s oil and gas production activities at its Escravos, Offshore, Terminal, Onshore and Swamp locations, and other CNL locations including its operational support and logistics bases in Lagos, Warri and Port Harcourt as required.

The services are estimated to commence first quarter of 2016 for a proposed contract term of two (2) years plus an optional one (1) year term extension.

Scope of Work:

The scope of work shall include, but will not be limited to the following:

Provision of all services, including supply of all skilled, qualified and certified personnel, supervision and provision of testing devices, equipment, tools, and other items necessary for the maintenance (predictive, preventive and corrective) and operation of HVAC system(s). The services will also include engineering, project management, equipment specification, procurement, commissioning, and operation for major and minor turnarounds. Services shall be performed 24 hours a day, 7 days per week on a call-out basis to support CNL’s oil and gas production activities. 

The services will specifically cover all aspects of repair and maintenance of HVAC systems including:

  • Routine preventive, corrective and predictive maintenance of all HVAC systems as directed by CNL or based on the Original Equipment Manufacturer (OEM) recommendations. The HVAC systems include window units, split units, central unit packages and various types HVAC chiller packages with simple and complex control systems used in process plants and Infrastructures including interfaces with Process Control Systems and Alarming systems.
  • Troubleshooting and repair of HVAC systems and ancillary components including the electrical, instrumentation, controls and mechanical components of the HVAC system and
  • Provision of HVAC duct and piping insulation and re-insulation (various types and sizes) and HVAC ducting, re-ducting and piping (various types and sizes). This includes removal of the existing insulation and ducting in the case of re-insulation and re-ducting.
  • Engagements with the OEM to develop equipment and parts specifications and job procedures, and to repair, commission and startup the equipment.
  • Operational procedure and specification development in accordance with industry recommended standards e.g. ASHRAE and OEM
  • Provision of tools and equipment including specialist tools and diagnostic equipment. This includes transportation of the tools and equipment to CNL’s locations.
  • All manpower, management, supervision and resources necessary to perform the services listed above.
  • Consumables, if required, which shall include but not be limited to:

(a)       Air Filters of required sizes

(b)       Refrigerant gas of required specification

(c)       Oil of specified type recommended by manufacturer

(d)       Operational spare parts (other than those indicated by CNL)

  • Routine operational and, major and minor

Mandatory Tender Requirements:

(A)      To be eligible for this tender exercise, Interested bidders are required to be pre – qualified in Category 30103 (Process / Utilities / Piping / HVAC Services) Category A, B, C and D in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified bidders in this category by the bid close date will receive an Invitation to Technical Tender (ITT).

(B)       Please note that interested bidders including their proposed sub-contractor(s) shall be required to:

(I)        Meet all JQS mandatory requirements to be listed as “PREQUALIFIED” and “LIVE” for a category in the JQS database.

(II)       Meet all Nigerian Content requirements stated in this advert in their responses to the ITT. Failure to meet the Nigerian Content requirements is a “FATAL FLAW”.

(C)       To determine if you are pre-qualified and view the product/service category you are listed for: Openwww.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.

(D)      If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.

(E)       To initiate and complete the JQS pre-qualification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.

Nigerian Content Requirements

CNL is committed to the development of the Nigerian Oil and Gas Industry in accordance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.

Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).

Interested bidders shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in the next tender stage.

The following are the Nigerian Content requirements interested bidders are expected to comply with in their technical bid submission.

(A)      Demonstrate that the entity is a Nigerian registered company, or a Nigerian registered company in genuine alliance or joint venture with a foreign company, with the details of the scope of the alliance or joint venture and responsibilities of the parties for services covered by this tender opportunity provided. Such companies must show evidence of a binding joint venture agreement duly signed by the CEO of both companies including evidence or plans for physical operational presence and set-up in Nigeria.

(B)       Furnish details of company ownership and shareholding structure. Also submit clear photocopies of your CAC Forms C02 and Co7.

(C)       Provide evidence of the percentage of 1) key management positions that are held by Nigerians and 2) total work force that are Nigerians. Also, show overall percentage of work to be performed by Nigerian resources relative to total work volume.

(D)      Provide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of bidder’s Nigerian Content contact or manager.

(E)       State proposed total scope of work to be performed by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshops. Attach details of past experience of use of such offices and workshops.

(F)       Specific to this tender opportunity, provide a detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.

(G)      Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).

(H)     Location of in-country facilities, (equipment, storage, workshops, repair, maintenance and testing facilities).

(I)        Interested bidders must be willing and able to provide evidence of maximization of made-in-Nigeria goods and services.

(J)       Provide details on any other Nigerian Content initiative your company is involved in.

(K)      Provide evidence of Memorandum of Understanding (MOU) with the Oil & Gas Trainers Association of Nigeria (OGTAN) registered trainer to conduct classroom training modules and on the job attachment.

(L)      Provide human capacity building development plan including budget which must be a minimum of 10% man-hours or cost. Training will be targeted at developing capacity of personnel other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers will be utilized to cover classroom modules.

(M)     Provide details of equipment ownership.

(N)      Interested bidders are required to present Nigerian Content Equipment Certificates (NCEC) issued by NCDMB (or evidence of application for the certificate) in respect of any components, spares, equipment, systems and packages to be used for the proposed services being tendered.

(O)      All interested bidders are required to submit as part of the Nigerian Content requirement, a signed Memorandum of Agreement (MOA) between it and one of the research and development (R & D) clusters established by NCDMB. The MOA shall be relevant to the scope of services and shall indicate how the bidder intends to use the relevant R&D clusters during the performance of the services.

Close Date

Only bidders who are registered with NJQS Product/Category 30103 (Process / Utilities / Piping / HVAC Services) Category A, B, C and D by 4:00pm, August 7, 2015 being the advert close date shall be invited to submit a technical bid.

Please note the following:

(1)       Companies that are eligible for this tender opportunity are expected to be prequalified in NJQS under the stated product/service category.

(2)       The ITT and any further progression of this tender shall be via NipeX.

(3)       All costs incurred by the interested bidder in preparing and processing NJQS prequalification shall be solely for the interested bidders accounts.

(4)       This advertisement shall neither be construed as any form of commitment on the part of CNL to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from CNL, NNPC and/or any of their affiliates by virtue of such companies’ having been prequalified in NJQS.

(5)       The tendering process shall be the NNPC tendering process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified bidders will be requested to submit commercial tenders.

(6)       CNL will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.

Please visit NipeX portal at www.nipexng.com for this advert and other information.

Management

Chevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B, 12825, Lagos.

Chevron Nigeria Limited

R.C. 6135

Operator of the NNPC/Chevron Joint Venture

 Tender Advert for Provision of Automation/Control Systems Services

Nipex Tender No: 0300373

Introduction:

Chevron Nigeria Limited (CNL), operator of the Nigerian National Petroleum Corporation (NNPC/CNL Joint Venture, plans to engage the services of competent and qualified companies with relevant experience in the area of provision of instrumentation, control and automation services to support CNL’s oil and gas production activities at Escravos, EGTL, Offshore, Onshore and Swamp locations.

The services are estimated to commence second quarter of 2016 for a proposed contract term of two (2) years plus an optional one (l) year term extension.

Scope of Work:

The scope of work shall include but will not be limited to the following:

Provision of maintenance and engineering services to support instrumentation and automation, process, automation and safety system controls. The services will also include engineering, troubleshooting, control philosophy development, Original Equipment Manufacturer (OEM) engagement, control system integration as well as preventive and corrective maintenance of automation and control systems in CNL’s operational assets. The services may be required in all

CNL operational locations including logistics bases and offsite location such as project yards.

The services may cover provision of automation/control systems services for some of the equipment/systems listed below.

The services may cover provision of automation/control systems services for some of the equipment/systems listed below.

Yokogawa:

CS3000, CENTUM VP, ProSafe, ProSafe-RS,

Stardom, PRM, ExaOPC, ExaQuantum,

ExaPLOG, GSGW, SIOS, PGDS

Allen Bradley / Rockwell Automation:

PLC5, SLC500, Control Logix, Micrologix

Panel Views, RSview HMI

Wonderware:

InTouch, Archestra A, InSQL, Factory Suite

SCADA:

PI Historian, Process Book

Honeywell: 
Plantscape & FSC

Other Packaged OEM Skid & Equipment:

As required
The services will also include the following requirements:

  • The contractor shall have the technical expertise to work on various OEM control system types, models, software, hardware, interfaces, etc. and shall be up-to-date with required upgrades and updates. The contractor shall be capable of integrating various types OEM models including packaged equipment control integrated to other equipment control system as well as the central control systems.
  • The contractor shall be required to engage the OEM to provide qualified and certified Subject Matter Experts (SME) for software engineering, integration and maintenance support services in troubleshooting of process control and safety systems, instrumentation and The contractor shall also be responsible for engineering, project management,engagement of OEM(s) and Field Service Reps (FSR), pre-commissioning and commissioning activities (major and small capital projects), etc..
  • The contractor shall have equipment required for testing the OEMs systems at its facility in Nigeria. The contractor’s facility in Nigeria shall be fully outfitted and equipped with OEM standard equipment enabling offsite simulations, trending, acceptance tests etc.
  • The contractor shall provide training to CNL personnel locally in Nigeria using the facility and equipment stated above and be able to provide OEM type or qualified training.
  • The contractor’s Nigerian office shall be set up with the ability to provide remote troubleshooting of CNL’s automation asset.
  • The contractor shall provide instrumentation support Including process control field devices (transmitters), troubleshooting and integration to control systems.
  • The contractor shall be certified or qualified by the OEM(s) or demonstrate previous working relationships and engagements with the OEM(s) to be engaged for the services
  • The contractor shall utilize certified and skilled professionals with not less than 7 years of relevant automation and control system experience for the services.

Mandatory Tender Requirements:

(A)      To be eligible for this tender exercise, interested bidders are required to be pre – qualified In Category 30105 (Electro / Control Instrumentation Services) Category A & B in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified bidders in this category by the bid close date will receive an Invitation to Technical Tender (ITT).

(B)       Please note that interested bidders including their proposed sub-contractor(s) shall be required to:

(I)        Meet all JQS mandatory requirements to be listed as “PREQUALIFIED” and “LIVE” for a category in the JQS database.

(II)       Meet all Nigerian Content requirements stated in this advert in their responses to the ITT. Failure to meet the Nigerian Content requirements is a “FATAL FLAW”.

(C)       To determine if you are pre-qualified and view the product/service category you are listed for; Openwww.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.

(D)      If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.

(E)       To initiate and complete the JQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.

Nigerian Content Requirements

CNL is committed to the development of the Nigerian Oil and Gas Industry in accordance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.

Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).

Interested bidders shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in the next tender stage

The following are the Nigerian Content requirements interested bidders are expected to comply with in their technical bid submission.

(A)      Demonstrate that the entity is a Nigerian registered company, or a Nigerian registered company in genuine alliance or joint venture with foreign company with details of the scope of the alliance
or joint venture and responsibilities of the parties for services covered by this tender opportunity provided. Such companies must show evidence of a binding joint venture agreement duly signed by the CEO of both companies including evidence or plans for physical operational presence and set-up in Nigeria.

(B)      Furnish details of company ownership and shareholding structure. Also submit clear photocopies of your CAC Forms C02 and Co7.

(C)       Provide evidence of the percentage of (1) key management positions that are held by Nigerians and (2) total work force that are Nigerians. Also, show overall percentage of work to be performed by Nigerian resources relative to total work volume.

(D)      Provide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of bidder’s Nigerian Content contact or manager.

(E)       State proposed total scope of work to be performed by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshops. Attach details of past experience of use of such offices and workshops.

(F)       Specific to this tender opportunity, provides detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.

(G)      Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).

(H)      Location of in-country facilities, (equipment, storage, workshops, repair, maintenance and testing facilities).

(I)        Interested Bidder must be willing and able to provide evidence of maximization of made-in-Nigeria goods and services.

(J)        Provide details on any other Nigerian Content initiative your company is involved in.

(K)      Provide evidence of Memorandum of Understanding (MOU) with the Oil & Gas Trainers Association of Nigeria (OGTAN) registered trainer to conduct classroom training modules and on the job attachment.

(L)      Provide human capacity building development plan including budget which must be a minimum of 10% man-hours or cost. Training will be targeted at developing capacity of personnel other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers will be utilized to cover classroom modules.

(M)     Provide details of equipment ownership.

(N)      Interested bidders are required to present Nigerian Content Equipment Certificates (NCEC) issued by NCDMB (or evidence of application for the certificate) in respect of any components, spares, equipment, systems and packages to be used for the proposed services being tendered.

(O)      All interested bidders are required to submit as part of the Nigerian Content requirement, a signed Memorandum of Agreement (MOA) between it and one of the research and development (R&D) clusters established by NCDMB. The MOA shall be relevant to the scope of services and shall indicate how the bidder intends to use the relevant R&D clusters during performance of the services.

Close Date

Only bidders who are registered with NJQS Product/Category 30105 (Electro / Control Instrumentation Services) Category A, B, C and D by 4:00pm, August 7, 2015 being the advert close date shall be invited to submits technical bid.

Please note the following:

(1)       Companies that are eligible for this tender opportunity are expected to be prequalified in NJQS under the stated product/service category.

(2)       The ITT and any further progression of this tender shall be via NipeX.

(3)       All costs incurred by the interested bidder in preparing and processing NJQS pre-qualification shall be to the contractors accounts.

(4)       This advertisement shall neither be construed as any form of commitment on the part of CNL to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from CNL, NNPC and/or any of their affiliates by virtue of such companies having been pre-qualified in NJQS.

(5)       The tendering process shall be the NNPC tendering process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified bidders will be requested to submit commercial tenders.

(6)       CNL will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.

Please visit NipeX portal at www.nipexng.com for this advert and other information.

Management

Chevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B, 12825, Lagos.

National Productivity Centre (NPC)

Plot 2173 Capetown Street, Wuse Zone 4, Abuja

 Invitation to Tender for 2015 Capital Projects

The National Productivity Centre (NPC) is a Federal Government Parastatal under the Ministry of Labour and Productivity. In line with the Centre’s mandate of enhancing individual and organizational productivity, the Centre is requesting for competent contractors for the execution of its capital projects as follows:

LOT 1: ANNIVERSARIES AND CELEBRATIONS (NATIONAL PRODUCTIVITY DAY-NPD-AND NATIONAL ORDER OF MERIT AWARD-NPOMA

SCOPE: To organize symposium, exhibition of made in Nigeria goods, panel meetings, Road shows and National Productivity Order of Merit Award-NPOMA- National Productivity Day-NPD celebrations.

LOT 2- RESEARCH AND DEVELOPMENT

SCOPE: Design and install Productivity and Quality Improvement Programmes in the Public and Private Sectors

LOT 3: PRODUCTIVITY SOFTWARE-PUBLIC SERVICE EXCELLENCE MODEL

SCOPE: To design productivity software on Public Service Excellence Model for the Centre

LOT 4: MONITORING AND EVALUATION

SCOPE: To monitor and evaluate the Centre’s projects and Programmes in 11 State

Requirements

Interested firms should include the following in their expression of interest:

(a)     Certificate of incorporation with Corporate Affairs Commission (CAC)

(b)     Comprehensive Company Profile

(c)      Copy of the Company s three years consecutive tax clearance

(d)     Copy of the Company’s VAT certificate

(e)      Evidence of execution of similar jobs by the contractor

(f)      Evidence of compliance with PENCOM Act, ITF Act etc.

Deadline for Submission of Document

The bid documents (Technical and Financial) should be submitted in separate envelopes and jointly in one envelope into the Tender box at the office of the Head of Procurement Unit in the Director-General’s office, National Productivity Centre, Plot 2173 Cape Town Street, Wuse Zone 4, Abuja.

The envelopes for Technical documents would be publicly opened by 12.00noon on the 30th of July, 2015.

Note: This process shall not place any commitment on the NPC nor establish legal relationship whatsoever No communication shall be entered into with any unsuccessful contractor.

Signed;

Management

Federal University Dutse

Old Government House, Kiyawa Road, Dutse, Jigawa State

Office of the Registrar

http/www.fudutse.edu.ng

 Invitation for Technical and Financial Bids for 2015 Special and Normal Intervention Fund Projects

 (1.0)  Preamble:

The Federal University Dutse in its effort to implement its 2015 Special and Normal Intervention Fund Projects hereby invites interested and reputable Contractors to tender for Financial and Technical bids exercise under the following Projects:

S/N Lot No. Project Tender Processing Fee
1 14/001 Construction and Furnishing of Faculty of Agriculture Phase III N25,000
2 14/002 Construction of Classrooms and Office Block including  External works N15,000
3 14/003 Construction of office Block for School of General Studies N15,000
4 14/004 Construction of Fish Pond and Hatchet at the University Farm N5,000
5 14/005 Construction of Sports Complex for staff and Students N10,000
6 14/006 Construction of Fence at Female Hostel N5,000
7 14/007 Construction of Botanical Garden for Department of Biological Sciences N5,000
8 14/008 Procurement of Assorted Books for Faculty of Agriculture N10,000
9 14/009 Procurement of Carrels and others equipment for Faculty of Agriculture, Mechanical shelves N19000 with 5bays by 2 sides in each roles of 4,50 No Rectangular tables and chairs 50 no carrels, 2No

Digital Photocopy Machine ARS310,1000 Desxtop Computers 15 Flat  Screen with 650v UPS, 10N0 HP Laser Jet P1102 Printer VAT inclusive

N5,000
10 14/10 Procurement of Laboratory Equipment for the Department of Physics; 1No High Resolution scamming Electron Microscopy (HR SEM), 1No Analog theorem proving system (TPS) and 178 No of Various equipment VAT inclusive N10,000
11 14/11 Procurement of Laboratory Equipment for the General Laboratory for Chemistry Department; 1No AAS ANO Accessories 1No Elemental Analyzer, 1No UV –Visible Spectrophometer, 2 No Digital PUME Cupboard and 22 No of various N5,000
12 14/12 Procurement of Laboratory Equipment for the Computer Science Department; 4No Micro Trainers KITS, 6 No Digital Oscilloscope, 1N) logic development system and 12No of various equipments VAT inclusive N10,000
13 14/13 Procurement of 2No SHUTTLE Buses of 30 seater capacity, 27 Litre Petrol Engine, AC 5-SPEED Manual Transmission for student N5,000
14 14/14 Procurement of Conference Furniture and Equipment for Faculty Building; 1No Digital Conference System unit, 4 No interpretation system unit & IRS interpreter Earphone Headset, 2 No IRS Radiator and GS No of Various Equipment N10,000
15 14/15 Supply and Installation of 4 No 10KVA Solar Generating Power Plant at New Computer Science Laboratory which include 15No photovoltaic Solar Panel 12VDC, 4No Solar Charge Controller 48VCD 60AMPS, 1No Inverter Pure Sine Wave Inverter digital Display 220/240V, 15VO Battery Original Deep Cycle12V 100AH with other Accessories and 5% VAT N10,000
16 14/16 Supply and Installation  of 2No Independent Solar Powered Inverters for new Faculty Buildings which include 10KVA/180VDC Inverter, 1No Deep Cycle Bate 12V/200/Ah8 x 150pcs, 1No Solar Panels 24/200W x 48PC, 1No MPPT Solar Panels Charge controller 180v/60A, Solar Structure Tracker +Hanger, Cables and others accessories including 5% VAT N10,000
17 14/17 Supply of 15 Triump Board 70 Multi touch LED LCD with Min PCS Fully Integrated Professional LED LOD IR Touch Technology, 1766mm Diagonal Full  HD windows, 8.1 OEM, TB Comenius office V1.0, Annotation software (Single User) myscript Stylus 32, software Enabling wireless connectivity to Another window with other Accessories N15,000
18 14/18 Construction of 1No Disinfection ditch for small & Large Ruminants, Construction of 1No Brooding room, Renovation of Home Economics LAB, Construction of 3No House & Hatches for Rabbits, Construction of 1No Borehole and Reticulation, Construction of shade for Nursing seedlings, Construction of 1No screen house, Construction of 1No house for Turkey & ducks including wallowing Area, Construction of 20 No Milking Parlour, Procurement of Teachings & Research Equipment & Procurement of Farm Equipment N15,000
19 14/19 Extension of Students Health centre including Furniture Installation external works N15,000
20 14/20 Supply and Installation of 17 units of 10KVA Luminious inverter with 180 units of 12V Batteries for the New Faculty Building and Academic Department N15,000

 (2.0)  Condition for Eligibility:

Interested contractors shall be required to submit the following documents:

(a)     Evidence of incorporation of company with Corporate Affairs Commission.

(b)     Company Audited Account for the last three (3) years.

(c)      Evidence of Tax Clearance Certificate & Remittance.

(d)     Provision of Tax Identification Number (TIN) by Contractor.

(e)      Evidence of compliance with Pension Reform Act, 2004

(f)      Evidence of Registration with Industrial Training Fund (ITF)

(g)     Evidence of Registration of Financial Regulatory Council

(h)     Evidence of Financial capability and banking support

(i)      Evidence of SIMILAR & verifiable projects executed not just awarded     within the last five years.

(j)      Annual turnover

(k)     Evidence of VAT registration.

(l)      Comprehensive Company profile and organizational structure.

(m)    Evidence of equipment and technology capacity.

(n)     Evidence of Experience/ Technical qualification and experience of key personnel and their professional certificate.

(o)     Sworn Affidavit to indicate that all information provided are true in every respect that the company is not in receivership and none of its directors were ever convicted of fraudulent activity.

(p)     Sighting of original copies of all the documents listed in the profile must be presented during opening of bids.

(q)     Payment of Non-refundable fee

(3.0)  Verification of Claims:

Please note that Federal University Dutse reserves the right to verify claims made for the purpose of pre-qualification and financial tender as submitted by interested contractors

(4.0)  Collection and Submission of Documents:

Documents can be obtain from the office Registrar and should be filed and neatly packaged in a sealed envelopes marked “Technical and Financial Bid for Year 2015 Special and Normal Intervention Projects” indicating in each case, the project lot at the top left hand corner of each of the two envelops: The Registrar, Federal University Dutse P.M.B 7156, Dutse, Jigawa State

Submission of document will close on 17th August 2015. and should be made on or before 12.00 Noon on the day of closing

To be considered for financial tendering, a bidder must score at least 70% and above for the listed category/lot

(5.0)  Opening of Document:

Opening of bids will hold in the presence of applicant or their representatives at the senate Building of the University located in former Government House Kandahar along Kiyawa Road, Dutse Jigawa State on the date of closing by 2:00pm

(6.0)  Sighting of Original Document Tendered:

Please note that the Federal University Dutse request all bidders to present all original documents for sighting during the opening of bids exercise as any bidder who falls to present the original document will be disqualified automatically

(7.0)  Important Notice:

All applicants are to note that:

(1)     Only firms capable of executing the jobs would be considered

(2)     Nothing in this advert shall be construed to be a commitment by Federal University Dutse

(3)     Failure to comply with any of the above Instruction or to provide any of the above listed documents may automatically result in disqualification

(4)     The University shall not enter in to any correspondence unsuccessful bidders

Signed

The Registrar,

Federal University, Dutse

P.M.B 7156

Dutse, Jigawe State

http/www.fudutse.edu.ng

Nigerian Maritime Administration and Safety Agency (NIMASA)

Established under the Nigerian Maritime Administration and Safety Agency (Act, 2007)

Maritime House, 4 Burma Road, Apapa, P.M.B. 12861, Lagos

E-mail: info@nimasa.gov.ng  

Website: www.nimasa.gov.ng

Invitation for Technical and Financial Bid for the Execution of the underlisted Projects / Services Appropriated in 2015 Budget

(1.0)    Introduction

The Nigerian Maritime Administration and Safety Agency (NIMASA), a Parastatal of the Federal Ministry of Transport intend to implement the under-listed projects as provided in the 2015 Budget

In compliance with the Public Procurement Act (PPA) 2007, the Agency hereby-invites reputable and interested Contractors/Companies/Firms to submit Technical and Financial Bids for the execution of the under-listed projects:

Lot -1 Supply of Chemistry Laboratory Equipment
Lot -2 Supply of Biology Laboratory Equipment
Lot -3 Supply of Physics Laboratory Equipment
Lot -4 Supply of Furniture
Lot -5 Supply of Science Laboratory Technology – Glass Blowing
Lot -6 Supply of Machine Tools Workshop Equipment
Lot -7 Supply of Health Centre Equipment
Lot -8 Supply of Safety Equipment
Lot -9 Supply of Domestic Equipment
Lot -10 Supply of River Ambulance
Lot -11 Supply of River Craft
Lot -12 Supply of Generators installation and commissioning of Generator
Lot -13 Supply of Vehicles
Lot -14 Supply of Examination Marking Machines
Lot -15 Supply of Windmill Generator System
Lot -16 Supply of Three-Phase circuit simulators
Lot -17 Supply of Tension / Compressor Universal Testing Machine
Lot -18 Supply of Asphalt Test Laboratory
Lot -19 Supply of Welding Equipment
Lot -20 Supply of Civil Engineering Soil Test Units
Lot -21 Supply of Gas and Oxy-acetylene weld Units
Lot -22 Design and Implementation of a Campus Wide Network
Lot -23 Construction of a Shopping Complex
Lot -24 Construction of Students Chapel
Lot -25 Supply of Chemical Engineering Laboratory Equipment
Lot -26 Supply of Electrical Equipment
Lot -27 Walkway Construction and Beautification

(2.0)  General Requirements:

Prospective bidders are required to submit the following documents:

(i)      Detailed Company Profile stating current office address, email and telephones.

(ii)     Evidence of Incorporation/Registration with Corporate Affairs Commission (CAC) by inclusion of Certificate of Incorporation and Articles of Association.

(iii)       Evidence of Tax Clearance Certificate and Tax remittances for the past three years (2012, 2013, 2014) corresponding with declared Annual Turnovers by inclusion of photocopy.

(iv)      Evidence of compliance with the Pensions Reform Act 2004, by inclusion of compliance letter from National Pension Commission.

(v)       Evidence of compliance with Industrial raining Fund (ITF) Act of 2011 by-inclusion of compliance letter from Industrial Training Fund.

(vi)    Evidence of VAT registration / Remittance certificate.

(vii)     Evidence of compliance with Nigerian Social Insurance Trust Fund (NSITF) by inclusion of compliance letter from Nigerian Social Insurance Trust Fund.

(viii)    Evidence of working capital for bids valued above 50 Million Naira and above and authority to seek reference from Bidder’s Bankers.

(ix)      A sworn affidavit that none of the Directors has been convicted in any court of law for any criminal offence.

Failure to submit all documents stated above may lead to the disqualification of the Bid.

(3.0)    Additional Requirements:

(i)         Proof of technical expertise to execute the job.

(ii)        Evidence of accreditation/professional registration.

(iii)       List of veritable documentary evidence of similar projects successfully executed/on-going within the last three years (e.g. Letters of Award, Job completion certificate etc).

(iv)      List of key personnel including professionals to be attached to the work including photocopies of relevant professional certificates.

(4.0)    Collection of Bidding Documents:

Interested Companies/Firms should collect Standard Bid Documents as from Wednesday 29th July 2015, from the office of the Deputy Director, Procurement, Room 500, 5th Floor, The Nigerian Maritime Administration and Safety Agency (NIMASA), No. 4 Burma Road, Apapa, Lagos, after the payment of a non-refundable fee of Thirty Thousand Naira (N30,000.00) only for each Lot at the Financial Services Department (Revenue Section) of the Agency on the 4th Floor. Payment shall be made to the Agency’s account stated below:

Bank: Skye Bank

A/C No: 1771644685

Address: Wharf Road, Apapa, Lagos

Evidence of payment shall be taken to the Revenue Unit of Financial Services Department for confirmation and issuance of receipt for bid collection

(5.0)    Submission of Technical and Financial Bids:

The Technical and Financial Bids of firms with all required supporting documents (Original and Duplicate) neatly packaged in sealed envelopes, each stating the Project, Lot Number and Company’s Name shall be submitted not later than Tuesday 1st September, 2015 by 11am, to the Office of: Deputy Director (Procurement), 5th Floor, Nigerian Maritime Administration and Safety Agency (NIMASA), No 4 Burma Road) Apapa, Lagos.

Please note that:

  • The financial bid should be in a separate envelope attached to the technical bid.
  • Bidders are advised to make their submissions before the closing date and time stated below. However, any submission on the last date should be done at the Bid Opening Venue, Multipurpose Hall of NMRDC Kirikiri, Apapa. Late submissions shall not be accepted.
  • Financial submissions / quote less than 80% of the estimation for the Project / Services bided for shall be disqualified.

(6.0)    Opening of Bids

Venue: Multipurpose Hall of NMRDC Kirikiri, Apapa

Date: Tuesday September 1, 2015

Time: 11.00am

Tenderers or their representatives, Relevant Professional Bodies and Non-Governmental Organisations (NGOs) are invited to witness tender Opening exercise and shall sign the register as evidence of their attendance.

Opening of financial bids of Tenders adjudged technically competent shall be done at a later date that will be communicated to successful (Pre-qualified) Firms only.

(7.0)    Enquiries

All enquiries regarding this advertisement should be directed to the Office of the Deputy Director, Procurement, Room 500,5th Floor, The Nigerian Maritime Administration and Safety Agency (NIMASA), No. 4 Burma Road, Apapa, Lagos, or through the following telephone numbers: 09093752657, 08062691690, 08062691690.

Notation:

(i)         Late submission of pre-qualification documents will not be entertained.

(ii)        All CAC, VAT, PENCOM, ITF and Tax Clearance Certificates submitted may be referred to Security Agencies, Corporate Affairs Commission (CAC), Federal Inland Revenue Service (FIRS), Industrial Training Fund (ITF), National Pension Commission and other relevant bodies for verification.

(iii)       This notice shall not be construed to be a commitment on the part of Nigerian Maritime Administration and Safety Agency to award any form of contract to any respondent nor shall it entitle any Company/Firm submitting documents to claim any indemnity from the Agency.

(iv)      The Agency is not bound to award to the lowest financial bidder.

(v)       The Financial Tenderer documents should be enclosed in a separate envelope from the Technical Bid documents. Failure to comply with this may lead to disqualification of the Tenderer.

(vi)      Bidders shall be responsible for all costs in preparation and submission of bids

Signed:

Management

Lower Benue River Basin Development Authority

PMB 10-2185, Makurdi

Invitation for Tenders/ Request for Proposals for the Execution of the Year 2015 Capital Projects

(1.0) Introduction

The Lower Benue River Basin Development Authority, a Federal Government Parastatal under the supervision of the Federal Ministry of Water Resources, in continuation of its statutory function of undertaking comprehensive development of both surface and underground water resources for multi-purpose uses and in order to boost food production by encouraging the active participation of farmers in irrigated agriculture, hereby invites suitably qualified and reputable companies, contractors and consultancy firms with proven competence and experience to submit their Tenders/Proposals for the execution of any of the under listed projects:

(A)    Consultancy

(1) Lot 1/CS/15: Design of Flood Channelization and Asphalted Road on Ado Street, Sabon Gari Ward, Lafia Road, Doma; To check Erosion Menace, Nasarawa State
(2) Lot 2/CS/15: Design of Township Roads and Drainage in Benue South Senatorial District (Bookshop Road, Jericho Road, Otukpa Street and Ajene Etina Street)
(3) Lot 3/CS/15: Design of 13 KM Mangun-Wubel Road with 25 Nos. Culvert and 2 Nos. Bridges, Mangu, Mangu LGA, Plateau State
(B) Goods
(1) Lot 1/GS/15: Purchase of Project Vehicle (Toyota Hilux Double Cabin) for Construction of Township Roads in Otukpo
(2) Lot 2/GS/15: Supply of Grinding and Block Moulding Machines in Mbayongo Community, Vandeikya LGA, Benue State
(C) Works
(1) Lot 1/WS/15: Construction of Flood Channelization and Asphalted Road on Ado Street, Sabon Gari Ward, Lafia Road, Doma; To check Erosion Menace, Nasarawa State
(2) Lot 2/WS/15: Repair and Reticulation of Solar Powered Borehole in Fwavwei-Jiku Rayfield, Jos South LGA, Plateau State
(3) Lot 3/WS/15: Drilling of 3 Nos. Solar Powered Boreholes at

Gajin-Bashar, Dogon Ruwa Safiyo and Mallam Adama

Wase LGA, Plateau State

 

(4) Lot 4/WS/15: Drilling of 1 No. Solar Powered Borehole at Ado Street, Doma, Nasarawa State
(5) Lot 5/WS/15: Drilling of 1 No. Motorised Borehole at Mbazegh Primary Health Care Centre Tomatar, Kusuv Mbakyaan, Buruku Federal Constituency, Benue State
(6) Lot 6/WS/15: Drilling of 1 No. Solar Powered Borehole in Damna in Wase LGA, Plateau State
(7) Lot 7/WS/15: Drilling of 1 No. Solar Powered Borehole in G/Kogi in Wase LGA, Plateau State
(8) Lot 8/WS/15: Drilling of 1 No. Solar Powered Borehole in Chapkwai in Wase LGA, Plateau State
(9) Lot 9/WS/15: Drilling of 1 No. Solar Powered Borehole in Tafawa- Gudus, Wase LGA, Plateau State
(10) Lot 10/WS/15: Drilling of 1 No. Solar Powered Borehole in Ungwan Birni Nyalum, Wase LGA, Plateau State
(11) Lot 11/WS/15: Construction of 5 No. Motorised Boreholes with Extensive Reticulation in Five (5) LGAs, Bokkos, Mangu, Pankshin, Kanke and Kanam in Plateau Central Senatorial District.
(12) Lot 12/WS/15: Construction of Township Roads and Drainage in Benue South Senatorial District (Bookshop Road, Jericho Road, Otukpa Street and AjeneEtina Street)
(13) Lot 13/WS/15: Construction of 3 Nos. Solar Powered Boreholes in the Following LGAs of Nasarawa State: Ittah, Nasarawa LGA, Akum, Nasarawa LGA, Nikoro, Kokona LGA Nasarawa West Senatorial District, Nasarawa State
(14) Lot 14/WS/15: Construction of 2 Nos. Blocks of Two Classrooms with VIP Toilets in FwavweiJiku, Rayfield, Jos South LGA.
(15) Lot 15/WS/15: Provision of 4 Nos. Motorised Boreholes: Guma LGA, Benue State
(16) Lot 16/WS/15: Provision of 7 Nos. Hand Pump Boreholes

 (2.0) Eligibility Criteria

(2.1)  For Consultancy Services

(a)     Evidence of registration with Corporate Affairs Commission (CAC) by inclusion of certified true copy (CTC) certificate of incorporation and memorandum & Articles of Association

(b)     Last 3 years Tax Clearance Certificates and Tax Identification Number (TIN).

(c)      Detailed Company Profile including evidence of qualified personnel.

(d)     Evidence of experience in at least five (5) jobs of similar nature and complexity executed within the last five years with verifiable letters of contract award and certificates of job completion

(e)      Evidence of financial capability /reference the project on award.

(f)      For JVs include MOU

(g)     Evidence of Registration with professional bodies such as ARCON or COREN or ICCON and IPAN, etc.

(h)     Full accounts details including SORT code

(i)      Evidence of Pension and Social security Contribution

(j)      Evidence of ITF registration with evidence of remittances

(k)     Possession of satisfactory Quality Assurance/Quality Control Manual

(l)      VAT Registration with evidence of remittances

(m)    3 years Audited Accounts (2012-2014)

(2.2) For Goods

(a)     Evidence of registration with Corporate Affairs Commission (CAC) by inclusion of certified true copy (CTC) certificate of incorporation and memorandum & Articles of Association

(b)     Last 3 years Tax Clearance Certificate and Tax Identification Number (TIN).

(c)      Detailed Company Profile including evidence of qualified personnel.

(d)     Evidence of experience in at least five (5) jobs of similar nature and complexity executed within the last five years with verifiable letters of contract award and certificates of job completion

(e)      Evidence of financial capability to execute the project on award.

(f)      For JVs include MOU

(g)     Full accounts details including SORT code

(h)     Evidence of Pension and Social security Contribution

(i)      Evidence of ITF registration with evidence of remittances

(j)        Possession of satisfactory Quality Assurance/Quality Control Manual

(k)     VAT Registration with evidence of remittances

(l)      3 years Audited Accounts (2012-2014)

(2.3)  For Works

(a)     Evidence of registration with Corporate Affairs Commission (CAC) by inclusion of certified true copy (CTC) certificate of incorporation and memorandum & Articles of Association

(b)     Last 3 years Tax Clearance Certificate and Tax Identification Number (TIN).

(c)      Detailed Company Profile including evidence of qualified personnel.

(d)     Evidence of experience in at least five (5) jobs of similar nature and complexity executed within the last five years with verifiable letters of contract award and certificates of job completion

(e)      Evidence of availability of relevant equipment

(f)      Having liquidity and/or evidence of access to or availability of confirmed credit facilities to execute the contract without delay.

(g)     For JVs include MOU

(h)     Full accounts details including SORT code and Evidence of financial capability to execute the project on award

(i)      Evidence of Pension and Social security Contribution

(j)    Evidence of ITF registration with evidence of remittances

(k)     Possession of satisfactory Quality Assurance/Quality Control Manual

(l)      3 years Audited Accounts (2012-2014)

(m)    For Lot 12/WS/15, Tenderers are to provide a confirmable bid security in the form of a bank draft or bank guarantee in a sum equal to 2% of the bid price in the format of Specified in the Standard Tender Document. Non-compliance will lead to disqualification.

(3.0)  Completion of Tender Documents

(3.1)  Interested companies or firms can collect Standard Tender Documents, from 12noon on Monday 6thJuly, 2015 from the office of:

The Managing Director

Lower Benue River Basin Development Authority

Km 10, Makurdi-Otukpo Road

P.M.B. 102185, Makurdi

Upon the presentation of evidence of payment of non-refundable tender fee of N20, 000.00 (Twenty Thousand Naira) only, for consultancy Lots, and N30,000.00 (Thirty Thousand Naira) only, for all other Lots into the Lower Benue RBDA Account as follows:

Account Name: Lower Benue River Basin Development Authority

Account Number: 0013355401

Bank: Unity Bank Plc

(4.0)  Submission of Bids

(4.1)  Completed Technical and Financial bids (three copies each) shall be submitted in two different sealed envelopes, respectively labeled “Technical Bid for…….(Lot No & Description)” and “Financial Bid for…. (Project name)” with the Company name indicated at the back of each envelope. Both envelopes should be sealed and placed in a third envelope marked with the “Lot No & Description” at the top right hand corner and addressed to:

The Managing Director

Lower Benue River Basin Development Authority

Km 10, Makurdi-Otukpo Road, P.M.B. 102185, Makurdi

(4.2)  The closing date for the submission of tenders is on or before 12.00 noon on Tuesday 18th August, 2015.

(4.3)  All tenders and Requests for proposals will be opened by 1.00pm at the conference hall of the Authority’s Headquarters, Makurdi on Tuesday 18th August, 2015.

(4.4)  Only companies whose tenders meet the basic technical requirements would have their financial bids considered.

(4.5)  All inquiries should as the case may be, directed to Mrs. Grace Ataigyo (GSM: 08036629078), Head, Procurement Unit, in Room 29 of the Authority’s Headquarters, Makurdi.

(5.0)  Disclaimer and Conclusion

(5.1)  This announcement is published for information purposes only and does not constitute an offer by Lower Benue River Basin Development Authority to transact with any party for the projects, nor does it constitute a commitment or obligation on the part of the Authority to procure concession services.

(5.2)  The Authority will not be responsible for any costs or expenses incurred by any interested party(ies) in connection with any response to this invitation and or preparation or submission in response to an inquiry.

(5.3)  Lower Benue River Basin Development Authority pledges fair and equal treatment of all participants but is not bound to shortlist any tenderer and reserves the right to annul the selection process at any time without incurring any liabilities.

Signed:

Management

SolarNigeria

Programme

Call for Expression of Interest

For Solar Developers and Solar Contractors to Pre-qualify for Design, Supply and Installation of Decentralized Solar Energy Systems in Kano and Kaduna

The SolarNigeria Programme (SNP) is an initiative of the UK’s Department for International Development (DFID). It aims to scale the public and private markets for distributed solar energy in Nigeria.

The SolarNigeria Programme has many components. Together they will overcome barriers and help to grow the solar market, increasing demand from households, businesses and public institutions. The Expression of Interest (EOI) advertised here is for a Commercial Solar Pilot (the Commercial Pilot).

The Commercial Pilot aims to demonstrate the technical and financial viability of solar power solutions for industry in Nigeria. Growth in the market for commercial scale solar will have positive effects. These include reduced costs for businesses leading to the creation of new jobs, increased productivity and income. A more active solar market will also help to reduce the costs and improve the effectiveness of solar provided to government facilities such as schools and clinics.

An important overall priority for DFID is to support the development of states in Northern Nigeria. So the Commercial Pilot will focus on the cities of Kano and Kaduna.

The purpose of this EOI is to pre-qualify solar developers and solar contractors to participate in the Commercial Pilot. The Commercial Pilot is at the stage of Concept Design. Responses to this EOI will shape decisions about the proposed Commercial Pilot. Please note that, because the Commercial Pilot is at the stage of Concept Design, the description and timelines in the EOI are indicative only. SNP does not bind itself, DFID or other programme partners by this notice or the EOI to any particular programme design or delivery.

Responses to the EOI will need to be received by 31st July 2015.

For a copy of the EOI,

Please email info@solar-ng.com and reference ‘EOI for Commercial Pilot’ in the subject heading.

The Shell Petroleum Development Company of Nigeria Limited

Operator of the NNPC/Shell/TEPNG/Agip Joint Venture

 Tender Opportunity: Provision of Shallow Offshore Analogue Survey and Positioning Services for SPDC

Tender Ref: NG01019688

NipeX Number: 0200368

Introduction

The Shell Petroleum Development Company of Nigeria Limited (SPDC), Operator of NNPC/Shell/Elf/Agip Joint Venture hereby announces to interested and prequalified companies an upcoming tendering opportunity for the Provision of Shallow Offshore Analogue Survey and Positioning Services for SPDC. The proposed contract will commence in Qt, 2016 and remain active for two (2) years duration, with an option of a one (1) year extension option.

(2.0) Scope of Work

The scope of work under the tender comprises the Provision of Shallow Offshore Analogue Survey and Positioning Services for SPDC.

Details of the scope include but is not limited to:

  • Analogue Detailed Bathymetry and Debris Detection Surveys.
  • Acoustic Pipeline inspection Surveys.
  • Rig Positioning Services.
  • New technologies, reporting, positioning & navigation and other miscellaneous survey services.

(3.0) Mandatory Requirements

(1)     To be eligible for this tender exercise, interested contractors are required to be pre-qualified in 3.10.03 Site Survey Services &/or 3.09.04 Geophysical & Hydrographic Site Survey Services category in NipeX Joint Qualification System (NJQS) data base. Only successfully pre-qualified suppliers in this category will receive Invitation to Technical Tender (ITT).

(2)     To determine if you are pre-qualified and can view product/service category you are listed for, openwww.nipexng.com and access NJQS with your login details, click on continue Joint Qualification Scheme tool, click ‘check my supplier status’ and then click ‘supplier product group’.

(3)     If you are not listed in a product/service category and you are registered with DPR to do business, contact NipeX office at 30, Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence for verification and necessary update.

(4)     To initiate the NJQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.

(5)     To be eligible, all tenders must comply with the Nigerian Content Requirements in the NipeX system.

(4.0) Nigerian Content Requirements

Vendors are to demonstrate strict compliance with the provisions of Nigerian Oil & Gas Industry Content Development Act and will be expected to meet the following requirements at the Technical and Commercial tendering phase:

  • Demonstrate that the entity is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria
  • Nigerian indigenous company executing the work scope in alliance with foreign companies and multinational should ensure that:
  • The foreign company or multinational is duly registered in Nigeria
  • submit CAC forms C02 and C07 of the both companies
  • submit binding Memorandum of Agreement (MoA) stating the following.
  • The Nigerian Indigenous company will be the lead of the partnership
  • The detailed scope of work to be performed by each party
  • Detailed personnel and equipment that each party will deploy to execute the work scope
  • The MoA will be governed by the laws of the federal Republic of Nigeria
  • The MoA to be signed by the Managing Directors of both companies.
  • International or multinational company working through a Nigerian subsidiary must
  • Demonstrate that the Nigerian subsidiary has 51% and above Nigerian equity shareholding in the ownership structure of the legal registered entity of tenderer in Nigeria and duly registered on the NCDMB NOGIC JQS as service providers under the applicable and relevant product category and
  • Demonstrate that g minimum of 50% of equipment to be deployed for execution of work shall be owned by the Nigerian subsidiary by providing a list of equipment for this tender and indicating those that will be owned by the Nigerian subsidiary.
  • Furnish details of company ownership and share holding structure. Also submit clear photocopies of your CAC Forms C02 and CO7
  • Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians, Also, show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
  • Provide a Nigerian Content Plan showing a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that would be involved in executing the work. Also provide details of Nigerian Content focal point or manager.
  • State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop; attach past experience of such
  • Specific to this work, provide detailed plan for staff training and development (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5)
  • Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services.
  • Provide details on any other Nigerian Content initiative your company is involved in.
  • Provide evidence of Nigerian Content Equipment Certificate (NCEC) from Nigerian Content Development & Monitoring Board (NCDMB) or evidence of the application of the certificates
  • All operators or project promoters in the Oil and Gas industry launching service contracts or other applicable projects with completion period of 12 months and above shall provide a R & D cluster approved by the Board as part of the operator’s Nigerian Content plan for the project.
  • The Arrangement shall be in the form of an MOA and indicate how the operator will deploy the cluster for any R&D requirements during the contract period and the first 5 years of the service life of the field, facility or plant.
  • All service companies are required to sign a MoA with the relevant research clusters. The MoA shall indicate how the service company intends to use the relevant research clusters during project execution to the satisfaction of the Board, Researchers that meet the technical requirements of the Board shall be notified on the Research Cluster they belong to: and they will be required to upload research proposals relevant to their cluster unto the NOGIC JQS portal (http://www.npgicjqs.com) on request.
  • All tenderer to submit Human Capital Development (NCD) training in fine with the NCDMB HCD Guideline
  • Provide evidence of registration with Nigerian Banks, Insurance companies and Legal system in Nigeria and show evidence of operation for the pass years.
  • All tenderers shall register with the NCDMB Joint Qualification Systems (NJQS) and show evidence of its registration with the Board for this service.
  • All tenderers shall be registered vendors in the NCDMB Marine vessel categorization exercise or have a binding Memorandum of Agreement (MOA) with NCDMB Nigerian registered vessel owners for this service.

(5.0) Closing Date

Only Tenderers who ore registered in the NJQ5 Product/Service category 3.10.03 Site Survey Services &/or 3.09.04 Geophysical & Hydrography Site Survey Services as on or before 7th August 2015 being the advert close date shall be invited to submit Technical bids.

(6.0) Additional Information

  • All cost incurred in preparing, registering and prequalifying for this and other product/service categories shall be borne solely by
  • Suppliers that are prequalified for this product/service category in NJQS must ensure that the name and contact details (physical address, email address and telephone number) of their company and authorized/responsible personnel is up-to-date in their company profile in the NJQS database.
  • SPDC will communicate only with authorized/responsible personnel of prequalified companies and not through unauthorized individuals or agents.
  • This advertisement of “Invitation to tender” shall neither be construed to be a commitment on the part of NNPC/SPDC to award any form of contract to any company and/or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from NNPC/SPDC and or any of its partners by virtue of such companies having been prequalified in
  • NNPC/SPDC reserves the right to take final decision on any of the documents received in the pre-qualification/ Technical package.

Please visit NipeX portal at www.nipexng.com for this advert and other information. Also note that this contract will be progressed through NipeX system.

Nigerian Maritime Administration and Safety Agency (NIMASA)

Established under the Nigerian Maritime Administration and Safety Agency (Act, 2007)

Maritime House, 4 Burma Road, Apapa, P.M.B. 12861, Lagos

E-mail: info@nimasa.gov.ng  

Website: www.nimasa.gov.ng 

Invitation for Technical and Financial Bid for the Execution of the underlisted Projects / Services Appropriated in 2015 Budget

(1.0)    Introduction

The Nigerian Maritime Administration and Safety Agency (NIMASA), a Parastatal of the Federal Ministry of Transport in compliance with the Public Procurement Act (PPA) 2007, invites reputable and interested Contractors and Companies with proven track records to submit Technical and Financial bids for Pre-qualification for the under-listed Projects and Services:

Projects/Services
Lot 1 Construction of one Standard Marine Pollution Laboratory at Warri, Delta State
Lot 2 Marine Management Consultancy
Lot 3 Provision of Consultancy services for Pension Remittances & Reconciliation
Lot 4 Supply and Installation of Hardware Resource (e.g Desktops, Printers and Periphepals)

(2.0)  General Requirements:

Prospective bidders are required to submit the following documents:

(i)      Detailed Company Profile stating current office address, e-mail and telephone Nos.

(ii)     Evidence of Registration with Corporate Affairs Commission (CAC) by inclusion of Certificate of Incorporation and Articles of Association.

(iii)       Evidence of Tax Clearance Certificate and Tax remittances for the past three years (2012, 2013, 2014) corresponding with declared Annual Turnovers by inclusion of photocopy.

(iv)      Evidence of compliance with the Pensions Reform Act 2004, by inclusion of compliance letter from National Pension Commission.

(v)       Evidence of compliance with Industrial training Fund (ITF) Act of 2011 by-inclusion of compliance letter from Industrial Training Fund.

(vi)    Evidence of VAT registration / Remittance certificate.

(vii)     Evidence of compliance with Nigerian Social Insurance Trust Fund (NSITF) by inclusion of compliance letter from Nigerian Social Insurance Trust Fund.

(viii)    Evidence of working capital for bids valued above 50 Million Naira and above and authority to seek reference from Bidder’s Bankers.

(ix)      A sworn affidavit that none of the Directors has been convicted in any court of law for any criminal offence.

Failure to submit all documents stated above may lead to the disqualification of the Bid.

(3.0)    Additional Requirements:

(i)         Proof of technical expertise to execute the job.

(ii)        Evidence of accreditation/professional registration.

(iii)       List of veritable documentary evidence of similar projects successfully executed/on-going within the last three years (e.g. Letters of Award, Job completion certificate etc).

(iv)      List of key personnel including professionals to be attached to the work including photocopies of relevant professional certificates.

(4.0)    Collection of Tender Documents/Submission of Proposals:

Interested Companies/Firms should collect Standard Bid Documents as from Monday 27th July 2015, from the office of the Deputy Director, Procurement, Room 500, 5th Floor, The Nigerian Maritime Administration and Safety Agency (NIMASA), No. 4 Burma Road, Apapa, Lagos, after the payment of a non-refundable fee of Thirty Thousand Naira (N30,000.00) only for each Lot at the Financial Services Department (Revenue Section) of the Agency on the 4th Floor. Payment shall be made to Nigerian Maritime Administration and Safety Agency (NIMASA) as stated below:

Bank Name: Skye Bank

A/C No: 1771644685

Address: Wharf Road, Apapa, Lagos

Please note that teller shall be taken to the NIMASA Revenue Unit of Financial Service Department for confirmation and issuance of receipt for Bid collection.

(5.0)    Submission of Technical and Financial Bids:

The Technical and Financial Bids of firms with all required supporting documents (Original and Duplicate) neatly packaged in sealed envelopes, each stating the Project, Lot Number and Company’s Name shall be submitted not later than Tuesday 1st September, 2015 by 11am, to the Office of:

Deputy Director (Procurement),

Room 500, 5th Floor,

Nigerian Maritime Administration and Safety Agency (NIMASA),

No 4 Burma Road) Apapa, Lagos.

 Please note that:

  • The financial bid should be in a separate envelopes attached to the technical bid.
  • Bidders are advised to make their submissions before the closing date 31stAugust, 2015. However, any submission on the last day should be done at the Bid Opening Venue, Multi-Purpose Hall of NMRDC, Kirikiri, Apapa before 11am. Late submissions will not be accepted.
  • Financial submissions /quote less than 80% of the estimation for all Project / Services shall be disqualified.

(6.0)    Opening of Bids

Venue: Multipurpose Hall of NMRDC Kirikiri, Apapa

Date: 31st August, 2015

Time: 11.00am

Tenderers or their representatives, Relevant Professional Bodies and Non-Governmental Organisations (NGOs) are invited to witness tender Opening exercise and shall sign the register as evidence of their attendance.

Opening of financial bids of Tenders adjudged technically competent shall be done at a later date that will be communicated to successful (Pre-qualified) Firms only.

Construction, Federal Government, Lagos, NIMASA, Supply

All enquiries regarding this advertisement should be directed to the Office of the Deputy Director, Procurement, Room 500, 5th Floor, The Nigerian Maritime Administration and Safety Agency (NIMASA), No. 4 Burma Road, Apapa, Lagos, or through the following telephone numbers: 09093752657, 08022081765 & 08062691690.

Notation:

(i)         Late submission of pre-qualification documents will not be entertained.

(ii)        All CAC, VAT, PENCOM, ITF and Tax Clearance Certificates submitted may be referred to Security Agencies, Corporate Affairs Commission (CAC), Federal Inland Revenue Service (FIRS), Industrial Training Fund (ITF), National Pension Commission and other relevant bodies for verification.

(iii)       This notice shall not be construed to be a commitment on the part of Nigerian Maritime Administration and Safety Agency to award any form of contract to any respondent nor shall it entitle any Company/Firm submitting documents to claim any indemnity from the Agency.

(iv)      The Agency is not bound to accept the lowest financial bidder.

(v)       The Financial Tenderer documents should be enclosed in a separate envelope from the Technical Bid documents. Failure to comply with this may lead to disqualification of the Tenderer.

(vi)      Bidders shall be responsible for all costs in preparation and submission of bids

Signed:

Management

 

Chevron Nigeria Limited

Operator of the NNPC/Chevron Joint Venture 

Tender Advert for Provision of Valve Maintenance Services

 Nipex Tender No: 0300346 

Introduction:

Chevron Nigeria Limited (CNL), operator of the Nigerian National Petroleum Corporation (NNPC)/CNL Joint Venture, plans to engage the services of competent and qualified companies with relevant experience in the area of provision of valve maintenance services to support CNL’s oil and gas production activities in its onshore (including EGTL), offshore and swamp locations.

The services are estimated to commence first quarter of 2016 for a proposed contract term of two (2) years plus an optional one (1) year term extension. 

Scope of Work:

The scope of work shall include, but will not be limited to the following:

Provision of services including all skilled, qualified and certified personnel, supervision, and provision of testing devices, equipment, tools, consumable materials and other items necessary for performance of the valve maintenance services (including shutdowns and turnarounds) on a call-out basis.

Successful bidder(s) must be able to provide proof of certification, training or qualifications of their personnel at site when requested by CNL. Bidder must own and operate a functional, certified and fully outfitted valve workshop in Nigeria and must be able to provide mobile valve shops when required.

The services, which may be on-site and/or off-site, includes but is not limited to the following;

  • Refurbishment of mechanical valves which may include:

(a)       Gate valve, all trims.

(b)      Butterfly valve, all trims.

(c)       Ball valve, all trims,

(d)       Globe valve, all trims.

(e)       Check valve, all trims

(f)        Plug valve, all trims

(g)       Special valve.

(h)       Orbit valve, all trims.

  • Servicing and calibration of instrument control valves which may include the following activities;

(a)       Actuator Servicing and calibration

(b)       Positioner servicing and calibration.

(c)       Solenoid inspection and testing.

(d)       Diaphragm inspection and testing.

(e)       Pressure regulator inspection, cleaning and setting.

  • Maintenance service and testing of Pressure Relieving Devices (PRD).
  • Hydraulic and pneumatic pressure test onsite and offsite including at the contractor valve shop.
  • Provision of a mobile valve workshop.
  • Utilization of contractor owned and outfitted valve maintenance shop.
  • Ability to meet huge ramp in valve maintenance demands e.g. turnarounds.
  • Engagement of Original Equipment Manufacturers (OEM) and Specialty Valve Manufacturers (SVM) with binding agreements that will enable local maintenance of specialty valves and provision of unique maintenance services.
  • Testing and maintenance in accordance with API and ANSI standards as well as other industry recommended standards.

Mandatory Tender Requirements;

(A)      To be eligible for this tender exercise, interested bidders are required to be pre-qualified in Category 30530 (Valve Management Services Including Testing and Repair) Category A and B in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified bidders in this category by the bid close date will receive an Invitation to Technical Tender (ITT).

(B)       Please note that interested bidders including their proposed sub-contractor(s) shall be required to:

(I)        Meet all JQS mandatory requirements to be listed as “PREQUALIFIED” and “LIVE” for a category in the JQS database.

(II)       Meet all Nigerian Content requirements stated in this advert in their responses to the ITT. Failure to meet the Nigerian Content requirements is a “FATAL FLAW”.

(C)       To determine if you are pre-qualified and view the product/service category you are listed for: Openwww.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then dick supplier product group.

(D)      If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi Drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.

(E)       To initiate and complete the JQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.

Nigerian Content Requirements

CNL is committed to the development of the Nigerian Oil and Gas Industry in accordance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.

Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).

Interested bidders shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in the next tender stage. 

The following are the Nigerian Content requirements interested bidders are expected to comply with in their technical bid submission.

(A)      Demonstrate that the entity is a Nigerian registered company, or a Nigerian registered company in genuine alliance or joint venture with foreign company with details of scope of alliance or joint venture and responsibilities of the parties for services covered by this tender opportunity provided. Such companies must show evidence of a binding joint venture agreement duly signed by the CEO of both companies including evidence or plans for physical operational presence and set-up in Nigeria.

(B)       Furnish details of company ownership and share holding structure. Also submit clear photocopies of your CAC Forms C02 and Co7

(C)       Provide evidence of the percentage of 1) key management positions that are held by Nigerians and 2) total work force that are Nigerians. Also, show overall percentage of work to be performed by Nigerian resources relative to total work volume.

(D)      Provides Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of bidder’s Nigerian Content contact or manager.

(E)       State proposed total scope of work to be performed by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshop. Attach details of past experience of use of such offices and workshops.

(F)       Specific to this tender opportunity, provide a detailed plan for staff training and development on engineering, project management and procurement (Including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.

(G)      Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).

(H)      Location of in-country facilities, (equipment, storage, workshops, repair, maintenance and testing facilities).

(I)        Interested bidders must be willing and able to provide evidence of maximization of made-in-Nigeria goods and services.

(J)        Provide details on any other Nigerian Content initiative your company is involved in

(K)       Provide evidence of Memorandum of Understanding (MOU) with the Oil & Gas Trainers Association of Nigeria (OGTAN) registered trainer to conduct classroom training modules and on the job attachment.

(L)       Provide human capacity building development plan including budget which must be a minimum 10% man-hours or cost. Training will be targeted at developing capacity of personnel other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers will be utilized to cover classroom modules,

(M)     Provide details of equipment ownership.

(N)      Interested bidders are required to present Nigerian Content Equipment Certificate (NCEC) issued by Nigerian Content Development and Monitoring Board (or evidence of application for the certificate) in respect of any components, spares, equipment, systems and packages to be used for the proposed services being tendered.

(O)      All interested bidders are required to submit as part of the Nigerian Content requirement, a signed Memorandum of Agreement (MOA) between it and one of the research and development (R&D) clusters established by NCDMB. The MOA shall be relevant to the project and shall indicate how the bidder intends to use the relevant R&D clusters during performance of the services.

Closing Date

Only bidders who are registered with NJQS Product/Category 30502 (Valves Management Services including Testing and Repair) Category A and B by 4:00pm, August 7, 2015 being the advert close date shall be invited to submit a technical bid.

Please note the following:

(1)       Companies that are eligible for this tender opportunity are expected to be prequalified in NJQS under the stated product/service category,

(2)       The ITT and any further progression of this tender shall be via NipeX.

(3)       All costs incurred by interested bidder in preparing and processing NJQS pre-qualification shall be solely for the bidder’s accounts.

(4)       This advertisement shall neither be construed as any form of commitment on the part of CNL to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from CNL, NNPC and/or any of their affiliates by virtue of such companies having been prequalified in NJQS.

(5)       The tendering process shall be the NNPC tendering process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified bidders will be requested to submit commercial tenders.

(6)       CNL will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.

Please visit NipeX portal at www.nipexng.com for this advert and other information.

Management

Chevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B, 12825, Lagos.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s